BibbyBibby

Construction Tenders

Fri September 21 2018

Related Information

Repair and maintenance services of measuring, testing and checking apparatus

Contract notice

Services

Directive 2014/24/EU

Section I: Contracting authority

I.1)Name and addresses
Driver and Vehicle Standards Agency
The Axis Building, 112 Upper Parliament Street
Nottingham
NG1 6LP
United Kingdom
Contact person: Mrs Suki Sohal
Telephone: +44 1159366844
E-mail: procurement.branch@dvsa.gsi.gov.uk
NUTS code: UK

Internet address(es):

Main address: www.gov.uk/dvsa

I.2)Information about joint procurement
I.3)Communication
The procurement documents are available for unrestricted and full direct access, free of charge, at: http://www.delta-esourcing.com/tenders/UK-UK-Nottingham:-Repair-and-maintenance-services-of-measuring%2C-testing-and-checking-apparatus./44P2A2P482
Additional information can be obtained from another address:
Driver and Vehicle Standards Agency
The Axis Building, 112 Upper Parliament Street
Nottingham
NG1 6LP
United Kingdom
Telephone: +44 1159366844
E-mail: procurement.branch@dvsa.gov.uk
NUTS code: UK

Internet address(es):

Main address: www.gov.uk/dvsa

Tenders or requests to participate must be submitted to the abovementioned address
I.4)Type of the contracting authority
Ministry or any other national or federal authority, including their regional or local subdivisions
I.5)Main activity
Other activity: Transport

Section II: Object

II.1)Scope of the procurement
II.1.1)Title:

Maintenance, Calibration, Repair and Supply of Portable Weighing Equipment

Reference number: K280020398
II.1.2)Main CPV code
50410000
II.1.3)Type of contract
Services
II.1.4)Short description:

For the maintenance, calibration, repair of existing Haenni portable weighing equipment along with the occasional supply of weigh pads, processors, printers, leveling mats, cables and consumables.

II.1.5)Estimated total value
II.1.6)Information about lots
This contract is divided into lots: no
II.2)Description
II.2.1)Title:
II.2.2)Additional CPV code(s)
II.2.3)Place of performance
NUTS code: UK
Main site or place of performance:

United Kingdom

II.2.4)Description of the procurement:

For the maintenance, calibration, repair of existing Haenni portable weighing equipment along with the occasional supply of weigh pads, processors, printers, leveling mats, cables and consumables.

II.2.5)Award criteria
Price is not the only award criterion and all criteria are stated only in the procurement documents
II.2.6)Estimated value
II.2.7)Duration of the contract, framework agreement or dynamic purchasing system
Duration in months: 24
This contract is subject to renewal: no
II.2.10)Information about variants
Variants will be accepted: no
II.2.11)Information about options
Options: no
II.2.12)Information about electronic catalogues
II.2.13)Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds: no
II.2.14)Additional information

Section III: Legal, economic, financial and technical information

III.1)Conditions for participation
III.1.1)Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers
List and brief description of conditions:

As per invitation to tender documentation.

III.1.2)Economic and financial standing
Selection criteria as stated in the procurement documents
III.1.3)Technical and professional ability
Selection criteria as stated in the procurement documents
III.1.5)Information about reserved contracts
III.2)Conditions related to the contract
III.2.1)Information about a particular profession
III.2.2)Contract performance conditions:

As per invitation to tender documentation.

III.2.3)Information about staff responsible for the performance of the contract
Obligation to indicate the names and professional qualifications of the staff assigned to performing the contract

Section IV: Procedure

IV.1)Description
IV.1.1)Type of procedure
Open procedure
IV.1.3)Information about a framework agreement or a dynamic purchasing system
IV.1.4)Information about reduction of the number of solutions or tenders during negotiation or dialogue
IV.1.6)Information about electronic auction
IV.1.8)Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: yes
IV.2)Administrative information
IV.2.1)Previous publication concerning this procedure
IV.2.2)Time limit for receipt of tenders or requests to participate
Date: 16/07/2018
Local time: 11:00
IV.2.3)Estimated date of dispatch of invitations to tender or to participate to selected candidates
IV.2.4)Languages in which tenders or requests to participate may be submitted:
English
IV.2.6)Minimum time frame during which the tenderer must maintain the tender
IV.2.7)Conditions for opening of tenders
Date: 16/07/2018
Local time: 11:00
Place:

DVSA Nottingham

Section VI: Complementary information

VI.1)Information about recurrence
This is a recurrent procurement: no
VI.2)Information about electronic workflows
Electronic ordering will be used
Electronic invoicing will be accepted
Electronic payment will be used
VI.3)Additional information:

The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.

For more information about this opportunity, please visit the Delta eSourcing portal at:

https://www.delta-esourcing.com/tenders/UK-UK-Nottingham:-Repair-and-maintenance-services-of-measuring%2C-testing-and-checking-apparatus./44P2A2P482

To respond to this opportunity, please click here:

https://www.delta-esourcing.com/respond/44P2A2P482

GO Reference: GO-2018611-PRO-12595358.

VI.4)Procedures for review
VI.4.1)Review body
Driver and Vehicle Standards Agency
www.gov.uk/dvsa 112 Upper Parliament Street
Nottingham
NG1 6LP
United Kingdom
E-mail: procurement.branch@dvsa.gov.uk

Internet address: www.gov.uk/dvsa

VI.4.2)Body responsible for mediation procedures
Driver and Vehicle Standards Agency
The Axis Building, 112 Upper Parliament Street
Nottingham
NG1 6LP
United Kingdom
VI.4.3)Review procedure
VI.4.4)Service from which information about the review procedure may be obtained
Driver and Vehicle Standards Agency
The Axis Building, 112 Upper Parliament Street
Nottingham
NG1 6LP
United Kingdom
Telephone: +44 1159366844
E-mail: procurement.branch@dvsa.gov.uk
VI.5)Date of dispatch of this notice:
11/06/2018


Previous Page
Tender Details
TitleDescription
StatusContract notice
ProcurementOpen procedure
Award CriteriaThe most economic tender
Date Published13th Jun 2018
CountryUK
Reference2018/S 111-252985
Main ActivitiesOther
Location-
CTypeServices
Common Procurement VocabularyRepair and maintenance services of measuring
testing and checking apparatus